Molybdenum Rod

molybdenum rod, NdFeB Rare Earth Magnets, Rare Earth Magnets, NdFeB magnet, Neodymium Iron Boron Magnet, neodymium magnets, SmCo magnets, Alnico magnets, Ferrite magnets, Ceramic magnets, strong magnets, super magnets, micro precision magnets, magnetic assemblies, sputtering targets, pure metal sputtering targets, alloy sputtering targets, oxide sputtering targets, sputtering targets, molybdenum metal, moly products, tungsten products, tungsten powder, high purity tungsten, metalic tungsten

Our molybdenum rods are manufactured as random length pieces or cut to customers' desired lengths. In addition, there are three different surface processes or finishes which can be provided, depending on the desired end use of the molybdenum rod. HMME produces pure and lanthanum doped molybdenum rod. The lanthanum doped molybdenum rods are intended for use in higher temperature applications where ductility is retained after recrystallization for material with smaller cross sections.

Divided forged molybdenum rod and polished molybdenum rod; forged molybdenum rod surface is allowed to have a oxidized film and slight forging hammer mark; polished molybdenum rod surface has a metallic luster and has no noticeable oxidation. The two surfaces have no defects, such as divided layer, crackle, burr, or vertical crackle, etc.

Used for making electric vacuum device and electric light source parts.

Molybdenum Rod Surface Finish:
Black - Surface is "as swaged" or "as drawn"; retaining a coating of processing lubricants and oxides. Cleaned - Surface is chemically cleaned to remove all lubricants and oxides. Ground - Surface is center-less ground to remove all coating and to achieve precise diameter control.

Diameter (<20mm) x L (no less than 5000mm)
Diameter (20-80mm) x L (<2000mm)

Grade Molybdenum(Mo) (%) The impurity content is not more than (%)
Fe Ni Al Si Mg C N O
Mo-1 99.95 0.01 0.005 0.002 0.01 0.005 0.01 0.003 0.008
Mo-2 99.95 0.01 0.005 0.005 0.01 0.005 0.01 0.003 0.02